You are not logged in or registered. Please login or register to use the full functionality of this board...
Linuxcat.org
CentOS LSI Raid card timeout constantly going into read only - Printable Version

+- Linuxcat.org (https://www.linuxcat.org)
+-- Forum: Linux Guides and Troubleshooting (/forumdisplay.php?fid=1)
+--- Forum: Linux Troubleshooting (/forumdisplay.php?fid=3)
+--- Thread: CentOS LSI Raid card timeout constantly going into read only (/showthread.php?tid=72)



CentOS LSI Raid card timeout constantly going into read only - knifebunny - 05-02-2014 06:00 PM

This can be caused by PCIE Power Management

to disable PCIE Active-State Power Management

First check the current policy using

cat /sys/module/pcie_aspm/parameters/policy

you should see something like

default [powersave] performance

vi /etc/grub.conf
add this to end of the kernel parameters:

pcie_aspm=off

vi /etc/rc.d/rc.local
add this to end:

echo performance > /sys/module/pcie_aspm/parameters/policy

reboot then test with:

cat /sys/module/pcie_aspm/parameters/policy
should show:

default [performance] powersave